Maxline Compressed Air Piping & Tubing
- MaxLine Brochure
- Installation Instructions
- Installation Photos
- Master Kits
- Flow Rate Calculator
- Adapt to Airnet
- Informational Videos
- Warranty
Maxline tubing holds its shape after hand bending around obstructions.
Maxline fitting design.
Maxline Single Port Outlet 1/4" NPT Out
In wall tubing or surface mount tubing, with water drain
M3810 - 1/2" Maxline Tubing x 1/4" Female NPT out
In wall tubing or surface mount tubing, with water drain
M3810 - 1/2" Maxline Tubing x 1/4" Female NPT out
Maxline Dual Port Outlets
Surface mounting tubing only, with water drain
M8200 - 1/2" Maxline Tubing x 1/2" Female NPT out (2x)
M8201 - 3/4" Maxline Tubing x 1/2" Female NPT out (2x)
Surface mounting tubing only, with water drain
M8200 - 1/2" Maxline Tubing x 1/2" Female NPT out (2x)
M8201 - 3/4" Maxline Tubing x 1/2" Female NPT out (2x)
Maxline Single Port Outlet 1/2" NPT Out
In wall tubing or surface mount tubing, with water drain
M8101 - 1/2" Maxline Tubing x 1/2" Female NPT out
Surface mount tubing works best, with water drain
M7510 - 3/4" Maxline Tubing x 1/2" Female NPT out
In wall tubing or surface mount tubing, with water drain
M8101 - 1/2" Maxline Tubing x 1/2" Female NPT out
Surface mount tubing works best, with water drain
M7510 - 3/4" Maxline Tubing x 1/2" Female NPT out
Maxline Dual Port Outlet with Shutoff
Surface mount tubing only, with water drain
M8200 V - 1/2" Maxline Tubing x 1/2" Female NPT out (2x)
M8201 V - 3/4" Maxline Tubing x 1/2" Female NPT out (2x)
Surface mount tubing only, with water drain
M8200 V - 1/2" Maxline Tubing x 1/2" Female NPT out (2x)
M8201 V - 3/4" Maxline Tubing x 1/2" Female NPT out (2x)
Maxline Single Port Outlet with Shutoff
Use only for surface mount tubing, with water drain
M8101 V - 1/2" Maxline Tubing x 1/2" Female NPT out
M7510 V - 3/4" Maxline Tubing x 1/2" Female NPT out
Use only for surface mount tubing, with water drain
M8101 V - 1/2" Maxline Tubing x 1/2" Female NPT out
M7510 V - 3/4" Maxline Tubing x 1/2" Female NPT out
In Wall Tubing Installations
Always pressure test before closing up the walls
1/2" Maxline is a great choice for in wall tubing 3/4" Maxline can be used for in wall tubing for longer tubing lengths. However, it is too hard to plumb the 3/4" directly to the back of the outlet. Reducing from 3/4" to 1/2" with a M8014 Reducing Tee is the best way
Use a backer board for a secure mounting surface for the outlet. Leave some tubing slack so you can pull the tubing thru the wall and attach to the back of the outlet.
Push the fitting and tubing in the wall and secure the block with screws.

Maxline Install
Maxline Install
Maxline Install
Maxline Install
Maxline Install
Maxline Install
Maxline Install
