Compressed Air Piping Systems

(866) 679 6242
Duratec Compressed Air SystemMaxline Compressed Air System

Tubing

Maxline Tubing Compressed Air Systems
  • Use for compressed air, inert gas, welding gas, beverage piping
  • 1/2, 3/4 and 1" sizes, (inside diameter)
  • 300 foot rolls available
  • Operating working pressure 200 psi @73°F, 160psi @140°F
  • Burst pressure 700 psi
  • Temperature range -40°F to 140°F
  • Compatible with common compressor oils
  • Can be buried underground or in concrete
  • For outside installation, cover or paint the tubing to protect from direct sunlight (UV rays)
Maxline Raduis

DURATEC WILL HOLD ANY BENT SHAPE

Bend Radius

  • 1/2 Duratec
    • Bend Radius: 4-6"
    • Outside Diameter: .63"
    • Inside Diameter: .50"
  • 3/4 Duratec
    • Bend Radius: 6-8"
    • Outside Diameter: .98"
    • Inside Diameter: .80"
  • 1" Duratec
    • Bend Radius: 10-12"
    • Outside Diameter: 1.26"
    • Inside Diameter: 1.02"

Fittings

Maxline Tubing Compressed Air Systems
  • Compression style
  • Nickel plated brass
  • Double oring seal, Buna N
  • Split ring allow disassembly
  • No expensive install tools required
Maxline Raduis

Installation

Easy Compressed Air Systems
1) CUT the tubing square
Easy Compressed Air Systems
2) BEVEL
Easy Compressed Air Systems
3) PUSH the fitting onto the tubing
Easy Compressed Air Systems
4) TURN the nut finger tight
Easy Compressed Air Systems
5) Tighten nut with wrench minimum 3/4 turn

#D8101 Single port outlet Kit, 1/2" Tubing, 1/2" Female NPT Out
#D8101V Single port outlet Kit with shutoff valve

#D8101 Outlet kit uses aluminum block #M81010

#D8200 Dual port outlet Kit, 1/2" Tubing, 1/2" Female NPT Out 2x
#D8200V Dual port outlet Kit, 1/2" Tubing, with shutoff valve
#D8201 Dual port outlet Kit, 3/4" Tubing, 1/2" Female NPT Out 2x
#D8201V Dual port outlet Kit, 3/4" Tubing, with shutoff valve

Dual Port outlets use Molded Dual Block F2025/F2026

#D8009 Single Port Elbow 1/2” Tubing x 1/2” Female NPT -used for inert gas, no moisture drain

Assembling Pipe Thread:

Assemble all NPT threads with two wraps of Teflon tape and then
PIPE SEALANT which prevents thread galling.

Customer Installation Photos

NOTE

“There are no Duratec master kits available. It is best to order exactly what you need for your installation.”

Contact Us